Mercedes-Benz GLC : DYNAMIC SELECT switch / Function of the DYNAMIC SELECT switch
NOTE Mercedes-AMG vehicles
Observe the notes in the
Supplement.
You could otherwise fail to recognize
dangers.
NOTE Plug-in hybrid
Observe the notes in the
Supplement.
You could otherwise fail to recognize
dangers.
Depending on the engine and equipment,
the vehicle has different drive programs.
Use the DYNAMIC SELECT switch to change
between the following drive programs.
The drive program selected appears in the multifunction
display of the on-board computer.
Individual
Sport
- continues to offer stability but with a sporty
setup
- allows the sporty driver a more active driving
style
- only suitable for good road conditions, a dry
road surface and a clear stretch of road
Comfort
- comfortable and economical driving
- balance between traction and stability
- recommended for all road conditions
Eco
- particularly economical driving
- balance between traction and stability
- recommended for all road conditions
Offroad
- only available for vehicles with Off-road package
- intervenes later if there is oversteering or
understeering, thus improving traction
- suitable for easily negotiable off-road terrain,
such as dirt tracks, gravel or sandy surfaces
- not suitable for use on public roads
Offroad+
- only available for vehicles with Off-road package
- intervenes later if there is oversteering or
understeering, thus improving traction
- suitable for rough terrain, such as steep
and/or uneven terrain or for driving on rocky
terrain
- not suitable for use on public roads
Depending on the drive program, the following
systems change their characteristics:
- Drive
- Engine and transmission management
- Active Distance Assist DISTRONIC
- R ESP®
- Vehicles with AIR BODY CONTROL or
DYNAMIC BODY CONTROL: suspension
- Electric power steering
Notes on the roof load display
Certain drive programs and ESP® settings are
unsuitable for transporting a roof load.
If one of these drive programs is set or selected,
the symbol is shown as a warning.
When
this symbol is shown, the selected drive program
is not suitable for transporting a load on the
roof.
The following drive programs are affected:
- Sport drive program
- Sport + drive program
- Individual drive program with the ESP® setting
Sport or Sport+
The symbol is also shown in the following situations:
- Within the themes if a corresponding
drive program is saved
- Within the reset display if the previously
active drive program is unsuitable for the
transport of a roof load
Other information:
Some systems will perform a self-test when the
ignition is switched on. Some indicator and
warning lamps may briefly light up or flash. This
behavior is non-critical. These indicator and
warning lamps indicate a malfunction only if they
light up or flash after the engine has been started
or during a journey...
High beam
Turn signal light, right
High-beam flasher
Turn signal light, left
Use the combination switch to
activate the
desired function.
Switching on high beam
Turn the light switch to the
or
position.
Push the combination switch
beyond the
point of resistance in the direction of arrow
...