Mercedes-Benz GLC : Replacing the windshield wiper blades / Removing the wiper blades
Fold the wiper arms away from
the windshield.

Hold the wiper arm with one
hand. With the
other hand, turn the wiper blade away from
the wiper arm in the direction of arrow
as
far as it will go.
Slide catch
in the direction of arrow
until it engages in the removal position.
Remove the wiper blade from the
wiper arm
in the direction of arrow
.
Switch the ignition on and then
off again
immediately.
Within around 15 seconds, press
and hold
the button on the combination
switch for approximately three seconds...
Insert the new wiper blade into
the wiper
arm in the direction of arrow .
Slide catch
in the direction of arrow
until it engages in the locking position...
Other information:
This function may not be available in all
countries.
An audible and visual alarm is triggered if an
alteration to your vehicle's angle of inclination is
detected while the tow-away alarm is armed.
The tow-away alarm is automatically armed after
approximately 60 seconds:
After locking the vehicle with the SmartKey
After locking the vehicle using KEYLESS-GO
The tow-away alarm is only armed when the following
components are closed:
Doors
Tailgate
The tow-away alarm is automatically deactivated:
After pressing the or
button on
the SmartKey
After pressing the start/stop button with the
SmartKey in the storage compartment
After unlocking the vehicle using KEYLESSGO
When using HANDS-FREE ACCESS
Information on collision detection on a parked
vehicle...
WARNING Risk of entrapment if the
windshield wipers are switched on while
the windshield is being cleaned
If the windshield wipers are set in motion
while you are cleaning the windshield or
wiper blades, you can be trapped by the
wiper arm.
Always switch off the
windshield wipers
and the ignition before cleaning the
windshield or wiper blades...