Mercedes-Benz GLC : Replacing the windshield wiper blades / Moving the wiper arms into the replacement position
Switch the ignition on and then
off again
immediately.
Within around 15 seconds, press
and hold
the
button on the combination
switch for approximately three seconds.
The wiper arms will move into the replacement
position.
WARNING Risk of becoming trapped if
the windshield wipers are switched on
while wiper blades are being replaced
If the windshield wipers begin to move while
you are changing the wiper blades, you can
be trapped by the wiper arm...
Fold the wiper arms away from
the windshield.
Hold the wiper arm with one
hand. With the
other hand, turn the wiper blade away from
the wiper arm in the direction of arrow
as
far as it will go...
Other information:
If the seat belt is pulled quickly or sharply, the
seat belt retractor locks. The seat belt strap cannot
be pulled out any further.
Always engage seat belt tongue
of the seat belt into seat belt buckle
of the corresponding seat.
Press and hold the seat belt outlet release and slide seat belt outlet
into the desired position...
NOTE Risk of an accident from objects
at close range
Parking Assist PARKTRONIC may not detect
certain objects at close range.
When parking or
maneuvering the vehicle,
pay particular attention to any
objects which are above or below the
sensors, e...