Mercedes-Benz GLC : Active Parking Assist / Parking with Active Parking Assist

Depending on the vehicle's equipment, the button may also be located at a different position on the center console.

Press button .

The media display shows the view of Active Parking Assist. Area displays detected parking spaces and vehicle path .

Vehicle path shown on the media display may differ from the actual vehicle path.

If a parking space is displayed: stop the vehicle.

Select desired parking space and confirm.

If necessary, select the parking direction (forwards or reverse), and confirm.

Vehicle path is shown, depending on selected parking space and the parking direction.

The turn signal indicator is switched on automatically when the parking procedure begins.

You are responsible for selecting the turn signal indicator in accordance with the traffic conditions. If necessary, select the turn signal indicator accordingly.

WARNING Risk of accident due to vehicle swinging out while parking or pulling out of a parking space

While parking or exiting a parking space, the vehicle swings out and can drive onto areas of the oncoming lane.

This could cause you to collide with objects or other road users.

Pay attention to objects and other road users.

Where necessary, stop the vehicle or cancel the parking procedure with Active Parking Assist.

If, for example, the Please Engage Reverse Gear message appears in the media display: select the corresponding transmission position.

The vehicle drives into the selected parking space.

During the parking procedure with Active Parking Assist, the lane markings are displayed in green in the camera image.

On completion of the parking procedure, the Parking Assist Finished, Take Control of Vehicle display message appears. Further maneuvering may still be necessary.

After completion of the parking procedure, safeguard the vehicle against rolling away. When required by legal requirements or local conditions: turn the wheels towards the curb.

You can stop the vehicle and change the transmission position during the parking procedure. The system then calculates a new vehicle path. If no new vehicle path is available, the system can change the transmission position again or cancel the parking procedure.