Mercedes-Benz GLC : Operating the combination switch for the lights / Activating/deactivating the hazard warning lights

Press button
.
The hazard warning lights will switch on automatically
if:
- The airbag has been deployed.
Switching off high beam
Move the combination switch back
to its
starting position.
High-beam flasher
Pull the combination switch in
the direction
of arrow ...
Cornering light function
The cornering light improves the illumination of
the road over a wide angle in the turning direction,
enabling better visibility on tight curves, for
example...
Other information:
WARNING Risk of accident and injury
due to children left unattended in the
vehicle
If children are left unsupervised in the vehicle,
they could, in particular:
open doors, thereby endangering other
persons or road users.
get out and be struck by oncoming traffic...
Operation of the ECO start/stop function
The ECO start/stop function is not available
in all drive programs, depending on the
engine. Observe the status display in the
multifunction display for this.
The engine is switched off automatically in the
following situations if all vehicle conditions for
an automatic engine stop are met:
You brake the vehicle to a standstill in transmission
position or
...