Mercedes-Benz GLC : Tire labeling / Information on the maximum tire load
The data shown in the image is example
data.
Maximum tire load is the
maximum permissible
weight for which the tire is approved.
Do not overload the tires by exceeding the specified
load limit. The maximum permissible load
can be found on the vehicle's Tire and Loading
Information placard on the B-pillar on the driver's
side.
US tire regulations stipulate that every tire manufacturer
or retreader must imprint a TIN in or
on the side wall of each tire produced.
The data shown in the image is example
data...
The data shown in the illustration is example
data.
Never exceed maximum tire pressure
specified
for the tire. Always observe the recommended
tire pressure for your vehicle when adjusting
the tire pressure...
Other information:
Some driving and driving safety systems use
cameras as well as radar or ultrasonic sensors
to monitor the area in front of, behind or next to
the vehicle.
The radar sensors are integrated behind the
bumpers and/or behind the Mercedes star.
Cameras in the outside mirrors
Multifunction camera
Front camera
Ultrasonic sensors
Rear view camera
WARNING Risk of accident due to
restricted detection performance of vehicle
sensors and cameras
If the area around vehicle sensors or cameras
is covered, damaged or dirty, certain
driving and safety systems cannot function
correctly...
Operation of the ECO start/stop function
The ECO start/stop function is not available
in all drive programs, depending on the
engine. Observe the status display in the
multifunction display for this.
The engine is switched off automatically in the
following situations if all vehicle conditions for
an automatic engine stop are met:
You brake the vehicle to a standstill in transmission
position or
...