Mercedes-Benz GLC : Driving and driving safety systems / HOLD function
HOLD function
The HOLD function holds the vehicle at a standstill
without requiring you to depress the brake
pedal, e.g. while waiting in traffic.
The HOLD function is only an aid. The responsibility
for the vehicle safely standing still remains
with the driver.
System limits
The HOLD function is only intended to provide
assistance when driving and is not a sufficient
means of safeguarding the vehicle against rolling
away when stationary.
- The incline must not be greater than 30%.
Activating/deactivating the HOLD function
WARNING Risk of an accident due to the
HOLD function being active when you
leave the vehicle
If the vehicle is only braked with the HOLD
function it could, in the following situations,
roll away:
If there is a malfunction in the system or
in the power supply.
If the HOLD function is deactivated by
depressing the accelerator pedal or brake
pedal, e.g. by a vehicle occupant.
Always secure the vehicle
against rolling
away before you leave it.
Requirements:
- The vehicle is stationary.
- The driver's door is closed or the seat belt on
the driver's side is fastened.
- The engine is running or has been automatically
switched off by the ECO start/stop
function.
- The electric parking brake is released.
- Active Distance Assist DISTRONIC is deactivated.
- The transmission is in position
,
or
.
Activating the HOLD function
Depress the brake pedal, and
after a short
time quickly depress further until the
display appears in the
multifunction display.
Release the brake pedal.
Deactivating the HOLD function
Depress the accelerator pedal
to pull away.
or
Depress the brake pedal until
the
display
disappears from the multifunction display.
The HOLD function is deactivated in the following
situations:
- Active Distance Assist DISTRONIC is activated.
- The transmission is shifted to position
.
- The vehicle is secured with the electric parking
brake.
In the following situations, the vehicle is held by
transmission position
and/or by the
electric
parking brake:
- The seat belt is unfastened and the driver's
door is opened.
- The vehicle is switched off.
- There is a malfunction in the system or the
power supply is insufficient.
Function of EBD
Electronic Breakforce Distribution (EBD) is characterized
by the following:
Monitoring and regulating the brake pressure
on the rear wheels...
Hill Start Assist holds the vehicle for a short
time when pulling away on a hill under the following
conditions:
The transmission is in position
or
...
Other information:
Function of Active Lane Change Assist
Active Lane Change Assist supports the driver
when changing lanes by applying steering torque
if the driver operates a turn signal indicator.
Observe the notes on driving systems and your
responsibility; you may otherwise fail to recognize
dangers...
Function of the ATA system
If the ATA system is armed, a visual and audible
alarm is triggered in the following situations:
When a door is opened
When the tailgate is opened
When the hood is opened
When the interior motion sensor is triggered
When the tow-away alarm is triggered
The ATA system is armed automatically after
approximately ten seconds in the following situations:
After locking the vehicle with the SmartKey
After locking the vehicle using KEYLESS-GO
Indicator lamp flashes when the
ATA system
is armed...