Mercedes-Benz GLC : Driving and driving safety systems / Function of Hill Start Assist
Hill Start Assist holds the vehicle for a short
time when pulling away on a hill under the following
conditions:
- The transmission is in position
or
.
- The electric parking brake is released.
This gives you enough time to move your foot
from the brake pedal to the accelerator pedal
and depress it before the vehicle begins to roll
away.
WARNING Risk of accident and injury
due to the vehicle rolling away
After a short time, Hill Start Assist no longer
holds the vehicle.
Swiftly move your foot
from the brake
pedal to the accelerator pedal. Do not
leave the vehicle when it is being held
by Hill Start Assist.
HOLD function
The HOLD function holds the vehicle at a standstill
without requiring you to depress the brake
pedal, e.g. while waiting in traffic.
The HOLD function is only an aid...
Function of ATTENTION ASSIST
ATTENTION ASSIST assists you on long, monotonous
journeys, e.g. on highways and trunk roads.
If ATTENTION ASSIST detects indicators of fatigue
or increasing lapses in concentration on the
part of the driver, it suggests taking a break...
Other information:
Function of Active Lane Keeping Assist
Active Lane Keeping Assist monitors the area in
front of your vehicle by means of the multifunction
camera. It serves to protect
you against unintentionally leaving your lane.
You will be warned by vibration pulses in the
steering wheel and guided by a course-correcting
brake application back into your lane...
Windshield wipers off
Automatic wiping, normal
Automatic wiping, frequent
Continuous wiping, slow
Continuous wiping, fast
Turn the combination switch to
the corresponding
position 1 - 5.
Single wipe/washing: push
the button on
the combination switch in the direction of
arrow ...