Mercedes-Benz GLC : SmartKey / Changing the unlocking settings
Possible unlocking functions of the SmartKey:
- Central unlocking
- Unlocking the driver's door and fuel filler flap
To switch between settings: press the
and
buttons simultaneously for
approximately six seconds until the indicator
lamp flashes twice.
Options if the unlocking function for the driver's
door and fuel filler flap has been selected:
- To unlock the vehicle centrally: press the
button twice.
- Vehicles with KEYLESS-GO: if you touch
the inner surface of the door handle on the
driver's door, only the driver's door and fuel
filler flap are unlocked.
Requirements:
The ignition is switched off.
To activate: press button
for approximately one second.
A visual and audible alarm is triggered.
To deactivate: briefly press button
again...
If you do not use the vehicle or a SmartKey for
an extended period of time, you can reduce the
energy consumption of the respective SmartKey.
To do so, deactivate the SmartKey functions...
Other information:
Observe the notes on matte finish care in the
chapter "Notes on paintwork/matte finish paintwork
care". They also apply to
matte decorative foils.
Observe the notes on cleaning decorative foils to
avoid vehicle damage.
Cleaning
For cleaning, use plenty of water and a mild
cleaning agent without additives or abrasive
substances, e...
Cornering light function
The cornering light improves the illumination of
the road over a wide angle in the turning direction,
enabling better visibility on tight curves, for
example. It can be activated only when the low
beam is switched on.
The function is active in the following cases:
At speeds below 25 mph (40 km/h) when
the turn signal light is switched on or the
steering wheel is turned
At speeds between 25 mph (40 km/h) and
43 mph (70 km/h) and when the steering
wheel is turned
Roundabout and intersection function: the
cornering light will be activated on both sides
based on an evaluation of the vehicle's current
GPS position...