Mercedes-Benz GLC : PRE-SAFE® system / Function of PRE-SAFE® PLUS (anticipatory occupant protection plus)
PRE-SAFE® (anticipatory occupant protection)
PRE-SAFE® is able to detect certain critical driving
situations and implement pre-emptive measures
to protect the vehicle occupants.
PRE-SAFE® can implement the following measures
independently of each other:
- Tightening the seat belts on the driver's seat
and front passenger seat.
- Increasing brake pressure when the vehicle
is stationary. This brake application is canceled
automatically when the vehicle pulls
away.
If an accident did not occur, the pre-emptive
measures that were taken are reversed.
System limits
The system will not initiate any action in the following
situations:
or
- When the vehicle is towing a trailer and there
is a risk of a rear impact
The system will not initiate any braking application
in the following situations:
or
- When entering or exiting a parking space
while using Active Parking Assist
PRE-SAFE® is able to detect certain critical driving
situations and implement pre-emptive measures
to protect the vehicle occupants.
PRE-SAFE® can implement the following measures
independently of each other:
Tightening the seat belts on the driver's seat
and front passenger seat...
Other information:
In this Operator's Manual, you will find the following
symbols:
DANGER
Danger due to not observing the warning notices
Warning notices draw your attention to hazards
that may endanger your health or life, or
the health or life of others.
Observe the warning notices...
If the exterior lighting is malfunctioning, Active
Parking Assist is not available.
Objects located above or below the detection
range of the sensors, e.g. overhanging loads,
overhangs or loading ramps of trucks, or the borders
of parking spaces, are not detected during
measurement of the parking space...