Mercedes-Benz GLC : Maneuvering assistance / Function of Cross Traffic Alert
Cross Traffic Alert is only available for vehicles
with Blind Spot Assist or Active Blind
Spot Assist.
Cross Traffic Alert can warn drivers of any crossing
traffic when backing up and maneuvering out
of a parking space. The radar sensors in the
bumper also monitor the area adjacent to the
vehicle. If a critical situation is detected, the
symbol appears in the media
display and
the vehicle can be braked automatically.
If the radar sensors are obstructed by vehicles
or other objects, detection is not possible.
Cross Traffic Alert is active under the following
conditions:
- If the vehicle is backing up at walking pace.
- Maneuvering assistance is activated.
Also observe the instructions on Blind Spot
Assist and Active Blind Spot Assist.
The performance of Drive Away Assist is limited
on inclines.
When driving with a trailer, Drive Away Assist is
not available.
Also observe the system limits of Parking
Assist PARKTRONIC...
Other information:
Requirements:
There are no persons in the vehicle.
The vehicle has been prepared for a wheel
change.
Important notes on using the jack:
Use only a vehicle-specific jack that has
been approved by Mercedes-Benz to raise
the vehicle.
The jack is only designed for raising and
holding the vehicle for a short time while a
wheel is being changed and not for maintenance
work under the vehicle...
Observe the notes on the
permitted towing
methods.
Make sure that the battery is
connected and
charged.
Observe the following points when the battery is
discharged:
The engine cannot be started
The electric parking brake cannot be
released or applied
Vehicles with automatic transmission:
The automatic transmission cannot be shifted
to position or
Vehicles with automatic transmission: If
the automatic transmission cannot be shifted
to position , or the
multifunction display
in the instrument cluster does not show
anything, have the vehicle transported away...