Mercedes-Benz GLC : Mirrors / Front-passenger outside mirror parking position function
The parking position makes parking easier.
The front-passenger outside mirror will swivel
downwards in the direction of the rear wheel on
the front passenger's side when:
- The parking position is stored.
- The front-passenger mirror is selected.
- Reverse gear is engaged.
The front-passenger outside mirror will move
back to its original position when:
- You shift the transmission to another transmission position.
- You are traveling at a speed greater than 9 mph (15 km/h).
- You press the button for the outside mirror on the driver's side.
WARNING Risk of acid burns and poisoning due to the anti-glare
mirror electrolyte
Electrolyte may escape if the glass in an automatic anti-glare mirror
breaks...
Storing
Select the front-passenger
outside mirror
using button .
Engage reverse gear.
Move the front-passenger outside
mirror into
the desired parking position using button
...
Other information:
Cornering light function
The cornering light improves the illumination of
the road over a wide angle in the turning direction,
enabling better visibility on tight curves, for
example. It can be activated only when the low
beam is switched on.
The function is active in the following cases:
At speeds below 25 mph (40 km/h) when
the turn signal light is switched on or the
steering wheel is turned
At speeds between 25 mph (40 km/h) and
43 mph (70 km/h) and when the steering
wheel is turned
Roundabout and intersection function: the
cornering light will be activated on both sides
based on an evaluation of the vehicle's current
GPS position...
You can store convenience settings and individual
settings in the vehicle and change or reset
them at any time.
Depending on the vehicle equipment, this
includes the following settings, for example:
Seat and steering wheel positions
Suspension and climate control settings
Individual settings, such as interior lighting
Depending on the selected equipment, you can
import data into vehicle infotainment functions
yourself...