Mercedes-Benz GLC : Data processing in the vehicle / Electronic control units
Electronic control units are installed in your vehicle.
Control units process data which, for example,
they receive from vehicle sensors, generate
themselves or exchange between themselves.
Some control units are required for the safe
operation of your vehicle, some assist you when
driving, such as driver assistance systems, while
others enable comfort or infotainment functions.
The following provides you with general information
regarding data processing in the vehicle.
Additional information regarding exactly which
data in your vehicle are collected, saved and
transmitted to third parties and for what purpose,
can be found in the information directly
related to the functional characteristics in question
in their respective operating instructions.
This information is also available on line and,
depending on the vehicle equipment, digitally.
Every vehicle is identified by a unique vehicle
identification number. Depending on the country,
this vehicle identification number can be
used by, for example, governmental authorities
to determine the identity of the owner...
Other information:
Storing
Select the front-passenger
outside mirror
using button .
Engage reverse gear.
Move the front-passenger outside
mirror into
the desired parking position using button
.
Calling up
Select the front-passenger
outside mirror
using button ...
Vehicles with a lithium-ion battery
When charging the battery and during starting
assistance, always use the jump-start connection
point in the engine compartment.
NOTE Damage to the battery from overvoltage
When charging using a battery charger without
a maximum charging voltage, the battery
or the on-board electronics may be damaged...