Mercedes-Benz GLC : Coupling/uncoupling a trailer / Coupling up a trailer
NOTE Damage to the starter battery due
to full discharge
Charging the trailer battery using the power
supply of the trailer can damage the starter
battery.
Do not use the vehicle's
power supply
to charge the trailer battery.
Information about a suitable ball neck for
Mercedes-Benz vehicles can be obtained from a qualified specialist workshop, e.g.
an authorized
Mercedes-Benz Center.
Remove the cover cap from the
ball neck
mount and store it in a safe place.
Position the trailer on a level
surface behind
the vehicle and couple it up to the vehicle.
Establish the electrical
connection between
the vehicle and the trailer.
Accessories can be connected to the permanent
power supply up to 180 W and to the
power supply that is switched on via the ignition
lock.
WARNING Risk of injury from the vehicle
level being changed
Vehicles with level control system: the
vehicle level may be changed unintentionally,
e...
WARNING Risk of being crushed and
becoming trapped when uncoupling a
trailer
When uncoupling a trailer with an engaged
inertia-activated brake, your hand may
become trapped between the vehicle and the
trailer drawbar...
Other information:
Left/right rear seat
Preferred securing system:
LATCH-type (ISOFIX) child seat
anchor
Also secure Top Tether if
present.
Alternative securing system:
Vehicle seat belt
Front passenger seat
Securing system:
Vehicle seat belt
Be sure to observe:
If the front passenger seat is occupied,
ensure, both before and during the journey,
that the status of the front passenger airbag
is correct for the current situation...
Requirements:
The vehicle is prepared for a wheel change.
Plastic hub cap
To remove: turn the
center cover of the hub
cap counter-clockwise and remove the hub
cap.
To install: make sure
that the center cover
of the hub cap is turned counter-clockwise...