Mercedes-Benz GLC : Seat belts / Seat belt warning function for the driver and front passenger
The
seat belt warning lamp in
the instrument
display is a reminder that all vehicle occupants
must wear their seat belts correctly.
The
seat belt warning lamp
lights up for six
seconds every time the vehicle is started.
In addition, a warning tone may sound.
When the driver's and front passenger's doors
are closed and the driver and front passenger
have fastened their seat belts, the seat belt
warning goes out.
In the following cases, the seat belt warning
lights up during a journey if:
- The vehicle speed exceeds 15 mph
(25 km/h) and the driver's or front
passenger seat belt is not fastened.
- The driver or front passenger unfastens their
seat belt while the vehicle is in motion.
Seat belt adjustment function
Vehicles with PRE-SAFE®: After a front seat
belt has been fastened, the automatic seat belt
adjustment may apply a certain tightening force...
Other information:
Restraint system functionality
When the ignition is switched on, a self-test is
performed, during which the
restraint system warning lamp lights up. It goes out no later
than a few seconds after the vehicle is started.
The components of the restraint system are then
functional...
NOTE Engine damage due to water
ingress
Take care not to point
the water jet
directly towards the air inlet grille below
the hood.
Observe the legal requirements, e.g. in a number
of countries, washing by hand is only permitted
in specially designated wash bays...