Mercedes-Benz GLC : Notes on off-road driving / Fording

Also observe the following information when fording:

  • Vehicles with AIR BODY CONTROL: select the highest possible vehicle level
  • Drive no faster than 6 mph (10 km/h).
  • Observe the maximum permissible fording depth.
  • Switch off automatic climate control.
  • Ensure that a bow wave does not form as you drive.
  • Do not stop in the water and do not switch off the engine. Ensure the ECO start/stop function is switched off.

    Driving on sand

    When driving on sand, also observe the following instructions: Select the drive program. Select a higher vehicle level. Shift to a lower gear. Drive quickly to overcome the rolling resistance; the vehicle may otherwise dig itself in...

    Driving in mountainous terrain

    Also observe the following information when driving in mountainous terrain: Observe the values of the approach/departure angle and of the maximum gradient...

    Other information:

    Mercedes-Benz GLC 2016-2023 Owners Manual: Adaptive Highbeam Assist


    Adaptive Highbeam Assist function WARNING Risk of accident despite Adaptive Highbeam Assist Adaptive Highbeam Assist does not react to: Road users without lights, e.g. pedestrians Road users with poor lighting, e.g. cyclists Road users whose lighting is obstructed, e...

    Mercedes-Benz GLC 2016-2023 Owners Manual: Preparing the vehicle for a wheel change


    Requirements: The required tire-change tool kit is available. If your vehicle is not equipped with the tirechange tool kit, consult a qualified specialist workshop to find out about suitable tools. The vehicle is not on a slope. The vehicle is on solid, non-slippery and level ground...

    Categories

    Adjusting the steering wheel electrically

    The steering wheel can be adjusted when the power supply is disconnected.

    Mercedes-Benz GLC. Adjusting the steering wheel electrically

    Mercedes-Benz GLC. Adjusting the steering wheel electrically To adjust the distance to the steering wheel

    read more

     
    Copyright © 2023 www.meglc.net